ADA STD-1
multitap delay with sweep, modulation and CV control

Technical data:
Dynamic Range: 93dB unweighted
Equivalent Input Noise: (EIN) -112 dBV (ref. .775 Vrms)
Bandwidth:, dry 10 Hz to 20KHz
delay ' 20 Hz to 13.5KHz
Distortion (THD) @ 1 KHz: dry, 0 dBV 0.05%
wet, 0 dBV 0.55%
dry, +4 dBV 0.065%
wet, +4 dBV 0.75%
Input: (Instrument Version) 40K ohm, single ended, 1/4" phone jack or 1
Megohm, FET input, single ended, 1/4" phone jack (switchable).
Input: (Studio Version) 40K ohm, single ended, 1/4" phone jack or 600
ohm, active balanced, XLR connector.
Ouput: (Instrument Version) Two single ended, 1/4 phone jacks, drives 600
ohm.
Output: (Studio Version) Two, single ended, 1/4" phone jacks, drives 600
ohm or two, 600 ohm balanced, transformer coupled, XLR connectors.
Maximum Input Level: +20 dBV, 40K ohm, single ended or balanced +6
dBV, 1 Megohm
Maximum Output: +20 dBM Gain -15dBto+27dB
Delay Time: Tap 1 1.3 ms to 6.5 ms
Tap 2 2.2ms to 11 ms Tap 3 4.6 ms to 20 ms Tap 4 5.8 ms to 29 ms Tap 5 8.3 ms to 46.5 ms Tap 6 11.1 ms to 55.5 ms
Sweep Rate: 0.1 sec to 25 sec
Sweep Modulation: .01 sec to 0.5 sec
Delay Time: C.V. Input 0 to +5 volts
Sweep Speed: C.V. Input 0 to +5 volts
C.V. Mix Output 0 to +5 volts
Remote Switch Logic: Grounding terminal engages
Power: 100-130 VAC. 50/60 Hz
Power Consumption: 12 watts
Option: A-Export 220-240 VAC 50/60 Hz B-Studio Version (See above)
Accessories: CONTROL PEDAL A
Dual Remote Footswitch